Wood drying equipment of energy conservation and consumption reduction method

Below for everyone to introduce wood drying equipment of energy conservation and consumption reduction method:
1. The application of inverter in the wood drying equipment, greatly save energy in drying equipment, using fan iscompared commonly big, and the fan are almost continuous operation, after using the inverter can save 30% energysaving. After the use of frequency converter, on the other hand, the overall equipment will drop a lot of noise, and prolongs the service life of wood drying equipment.
(2) for the selection of heat source according to the idea of saving energy and reducing consumption.
Wood drying equipment is a use of heat energy to high moisture content of lumber drying device, the use of thermalenergy play a very important role in the drying process. The heat is not taken away or circulation in time will have an effect on the whole system.
The generation of heat form have a lot of forms, such as electric heating tube, gas, diesel, coal through certainequipment can produce heat. Wood drying equipment is equipped with heat source including electric heater, gas combustion machine, fuel combustion machine, coal furnace, etc. Electric heating application in small wood dryingequipment of more extensive, it does not exist any pollution problems, heat faster. Burning machine is mainly used in large wood drying equipment, plays a significant role in industrial production. In recent years, with the rise of theelectronic industry, wood drying equipment also has a larger development, using the way of gas heat energy saving effect is good. Use of wood drying equipment of induced draft fan inverter to control, a high degree of automation,saving a large amount of manpower and material resources. Coal-fired stove as the heat source of the drying machine is widely applied, in the occasion of not too strict with the material can be directly used, in place of strict inmaterials with direct-fired hot blast stove can’t meet user requirements, must be combined with heat exchange device, reduce the pollution level for the material.
Above introduction is wood drying equipment of energy conservation and consumption reduction method, hope everyone tounderstand somewhat, for more information please visit: www.xinandry.com