• Position selection of humidity meter in wood drying kiln

Position selection of humidity meter in wood drying kiln

31 Mar

Position selection of humidity meter in wood drying kiln

Moisture meter in wood drying kiln location must be able to truly reflect the actual status of indoor air medium (temperature, humidity), which can reflect the average status of indoor air, generally choose the material pile side into the wind and the position of representative.If dry indoor air circulation is reversible, the pile wood moisture meter shall be installed on both sides, so that any time can stack into the wind with the village side of temperature and humidity as the basis of executing drying.

If using glass tube liquid thermometer hygrometer, hygrometer window high position should guarantee the operator head-up observation shall prevail;If the thermal resistance thermometer or thermocouple thermometer hygrometer, should be separately installed on both sides of material heap two identical hygrometer, height direction in high l / 2, position, in the middle of a drying chamber length direction.Two hygrometer can be switch rotation measurement, make the hygrometer on one side of the wood pile into work, to measure material pile of one side of the air inlets, medium state (temperature, humidity).

Due to the drying chamber has laid the captain axis, short axis wind machine, lateral ventilation type, side wind machine, hot air type and a variety of types such as jet type, and each type of drying chamber fan, heater installation also varied, therefore, the moisture meter location choice also can’t be the same, each enterprise according to the characteristics of their respective drying chamber structure, based on the above basic principles, carries on the reasonable choice.

Share this post

Related Posts

Wood drying common defects and prevention method

There many ways to dry wood,wood dry kiln is one of them .Many defects that occur during drying result. From [...]

2015-08-24
Test phase of the wood drying

Experimental wood drying, or is preliminary and promising.Mainly includes: (1) solar drying.Wood pile in east, west, south three surface drying [...]

2016-03-31
Wood drying kiln for periodic moisture measurements

In hardwood kilns, the conventional wisdom requires that multiple samples which are removed from the wood drying kiln for periodic [...]

2016-03-31
Working principle of humidity meter in wood drying kiln

Wood drying kiln is measured with a psychrometer wet dry indoor air relative humidity is not affected by temperature, [...]

2016-03-31
The Name Notification

 According to the development of our company,we have expanded the scale, and changed our company name from "Jiangyin XINAN Drying [...]

2016-03-31
The defects of wood drying

Wood drying, on the production if the incorrect drying process, the drying of wood will be due to uneven [...]

2016-03-31
Conventional Wood Drying Kiln

A wood drying kiln is a thermally insulated chamber, or oven, in which a controlled temperature regime is produced. Uses include [...]

2016-03-31
The matters need attention of using thermally modified wood

Thermally modified wood namely charring wood, carbonized wood is through carbonization processing timber, carbonization, carbon under the word is [...]

2016-03-31
Wood drying kilns are used at saw mills and treatment plants

A wood drying kiln and airflow controlling process is described in which the kiln includes an structure with a charge receiving [...]

2016-03-31
Thermal modification wood processing technology

In the 20th century 80 s, has hot modified wood began to mass production, at the same time, also [...]

2015-08-24